ESP8266 / Hiletgo 1.3" 128x64 OLED / U8g2 display library : Hello World

Using PlatformIO CLI on Linux (Ubuntu 18.04)

src/main.cpp

/*
Working with the 1.3" OLED Display 128x64 via I2C (software)
on a NodeMCUv2 ESP8266 board

HiLetgo
SSH1106

Arduino AVR PIC STM32

*/

#include "Arduino.h"
#include "U8g2lib.h"
#include <stdio.h>


U8G2_SH1106_128X64_NONAME_F_SW_I2C display(U8G2_R0,/*clk*/ 4, /*data*/ 5);

void setup() {

  Serial.begin(74880);
  display.begin();
  display.clearBuffer();

  display.setFont(u8g2_font_profont12_tf);
  display.drawStr(0,12,"Hello World");

  display.sendBuffer();
}

void loop() {
  //This is for verifying the code is running (viewed in the PIO monitor)
  Serial.println("Running...");
  delay(1000);
}

Setup

Using Linux (Ubuntu 18.04) + PlatformIO CLI

platformio.ini

[env:latest_stable]
framework = arduino
platform = espressif8266
board = nodemcuv2

lib_deps = olikraus/U8g2@^2.32.7

monitor_port = /dev/ttyUSB1
monitor_speed = 74880 ;Xtal on ESP8266 board (ESP-12E) is 26Mhz so 2880 * 26 = 74880

upload_speed = 921600 ; increased upload time from ~17 to ~3 secs.

For those interested or just starting out:

$ pio run --target upload
Processing latest_stable (framework: arduino; platform: espressif8266; board: nodemcuv2)
------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif8266/nodemcuv2.html
PLATFORM: Espressif 8266 (3.2.0) > NodeMCU 1.0 (ESP-12E Module)
HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash
PACKAGES: 
 - framework-arduinoespressif8266 3.30002.0 (3.0.2) 
 - tool-esptool 1.413.0 (4.13) 
 - tool-esptoolpy 1.30000.201119 (3.0.0) 
 - tool-mklittlefs 1.203.210628 (2.3) 
 - tool-mkspiffs 1.200.0 (2.0) 
 - toolchain-xtensa 2.100300.210717 (10.3.0)
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 36 compatible libraries
Scanning dependencies...
Dependency Graph
|--  2.32.7
|   |--  1.0
|   |--  1.0
Building in release mode
Compiling .pio/build/latest_stable/src/main.cpp.o
Linking .pio/build/latest_stable/firmware.elf
Retrieving maximum program size .pio/build/latest_stable/firmware.elf
Checking size .pio/build/latest_stable/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [====      ]  36.5% (used 29884 bytes from 81920 bytes)
Flash: [===       ]  26.3% (used 275109 bytes from 1044464 bytes)
Building .pio/build/latest_stable/firmware.bin
Creating BIN file ".pio/build/latest_stable/firmware.bin" using "/home/scotty/.platformio/packages/framework-arduinoespressif8266/bootloaders/eboot/eboot.elf" and ".pio/build/latest_stable/firmware.elf"
Configuring upload protocol...
AVAILABLE: espota, esptool
CURRENT: upload_protocol = esptool
Looking for upload port...
Auto-detected: /dev/ttyUSB1
Uploading .pio/build/latest_stable/firmware.bin
esptool.py v3.0
Serial port /dev/ttyUSB1
Connecting....
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: xxxxxxxxxxxxx
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Compressed 279264 bytes to 204757...
Writing at 0x00000000... (7 %)
Writing at 0x00004000... (15 %)
Writing at 0x00008000... (23 %)
Writing at 0x0000c000... (30 %)
Writing at 0x00010000... (38 %)
Writing at 0x00014000... (46 %)
Writing at 0x00018000... (53 %)
Writing at 0x0001c000... (61 %)
Writing at 0x00020000... (69 %)
Writing at 0x00024000... (76 %)
Writing at 0x00028000... (84 %)
Writing at 0x0002c000... (92 %)
Writing at 0x00030000... (100 %)
Wrote 279264 bytes (204757 compressed) at 0x00000000 in 2.7 seconds (effective 838.6 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
============================== [SUCCESS] Took 15.44 seconds ==============================
$ _